User manual

GAB-N-BA-e-1315 37

12.1.3 Explanation of the data transfer

Example:

Header1

Header2

-/space

unit

terminator

Header 1

2 byte, St or US, ST=weighing value stable, US=weighing value

instable

Header 2

2 byte, G or N, G=gross weight, N= net weight

space

Blank

W1-W7

Weight value with decimal position

Unit

2 byte, kg or lb

Terminator

<CR> <LF> (CR=Carriage return)

(LF= Line Feed)

12.2 Remote control instructions

The remote control commands are sent from the remote control unit to the balance

as ASCII code. After the balance having received the s/w/t commands, it will send the

following data.

Take into account that the following remote control commands must be sent without a

subsequent CR LF.

T: tare

Taring

Z: zero

Zeroing

SI: stable status

Output of instable weighing values (US) or stable weighing values

(ST)

ST stable status or

not

Output of stable weighing values (Y) or instable weighing values

(N)