User manual

GAB-N-BA-e-1315 25

10.4 Parts counting

Before the balance can count parts, it must know the average part weight (i.e.

reference). Proceed by putting on a certain number of the parts to be counted. The

balance determines the total weight and divides it by the number of parts (the so-

called reference quantity). Counting is then carried out on the basis of the calculated

average piece weight.

The higher the reference quantity the higher the counting exactness.

(example)

 Place the reference quantity

 Press

, the scales will change to quantity counting mode

Reference quantity of 10, P 10 will appear.

 Reference quantities of 10, 20, 50, 100 and 200 can be set

by pressing

TARE

(example)



GROSS



GROSS

pcs

 Confirm by pressing

You will briefly see a line on the screen before the scales

show the respective quantity

 To change between reference weight, total weight and

quantity, press the key.

 To return to weighing mode, press the

key.