User manual

FOB-BA-e-1118

8 Troubleshooting

The balance should be switched off for a short time following an interruption in the

programme sequence and disconnected from the mains supply. It is then necessary

to repeat the weighing process from the beginning.

Help:

Interruption Possible cause

Weight display is not illuminated.

• The balance is not switched on.

• The mains supply connection has been

interrupted (mains cable not plugged

in/faulty).

• Power supply interrupted.

• The recharchable battery pack is empty.

The weight display changes continu-

ally

• Draught/air movement

• Table/floor vibrations

• The weighing plate is in contact with for-

eign matter.

• Electromagnetic fields / static charging

(choose different location/switch off inter-

fering device if possible)

The weighing result is obviously in-

correct

• The balance display is not set to zero

• Adjustment is no longer correct.

• Great fluctuations in temperature.

• Electromagnetic fields / static charging

(choose different location/switch off inter-

fering device if possible)

Switch the balance off if other error messages should appear and then switch on

again. Contact the manufacturer if the error message does not disappear.