User manual

5.7.5 Position adjust switch

FOB-BA-e-1118

Adjust switch at the lower surface

(depending on the model, on the right

or the left side)

5.8 Verification

General:

According to the EU guideline 90/384/EEC balances must be verified if they are to be

used as follows (legally regulated area):

a) For commercial transactions if the price of goods is determined by weighing

b) For the production of medines in pharmacies as well as for analyses in the

medical and pharmaceutical laboratory

c) For official purposes

d) For the production of finished packages

In case of doubt, please contact your local office of weights and measures.

Verification information

An EU qualification approval is available for those balances marked as appropriate

for verification in the technical data. In the event that the balance is applied in an

area subject to verification as described above, it must be verified and re-verified at

regular intervals.

Re-verification of a balance is carried out in compliance with the respective legal pro-

visions of the states. The term of verification validity for balances in Germany, for

example, is normally 2 years.

The legal provisions of the country of use are to be observed.