User manual

7.2 Weighing
Operation Display
Ö Start balance by pressing
The balance displays for approx. 3 seconds [88888]
M
Memory
88888
kg
and then goes to [0]. Now it is ready for operation.
M
Memory
kg
Ö Only now (!) place goods onto weighing plate.
Take care that the weighed material does not touch the balance housing or the
base mat.
Now the weight is displayed, after the standstill control
appears the weighing unit [g] right-hand in the display.
M
Memory
12
3
kg
(Example)
If the material to be weighed is heavier than the weighing
range, the display will show [Error] (=Overload).
M
Memory
E
7.3 Taring
Operation Display
Ö Switch on balance by pressing and wait for the
[0] display.
M
Memory
kg
Ö Place the tare vessel on the weighing plate and press
the button. The balance display goes to [0].
M
Memory
kg
Ö Put the sample into the tare vessel.
The weight of the sample will be displayed.
M
Memory
kg
(Example)
Ö If after finishing the weighing process the button is
pressed again, [0] appears anew in the display.
M
Memory
kg
The taring process can be repeated any number of times, e.g. when adding several
components for a mixture (adding).
The limit is reached when the whole weighing range is exhausted.
After removing the taring container the total weight is displayed as negative display.
By pressing anew the button, the balance will go back to „0“.
FCE-BA-e-0810
12