User manual

Ö Weigh the material, the net weight will be indicated.

47.2

The taring process can be repeated any number of times,

e.g. when adding several components for a mixture

(adding). The limit is reached when the whole weighing

range is exhausted.

The weight of the weighing container will be displayed as a

minus number after removing the weighing container.

The tare weight is saved until it is deleted.

Delete tare

TARE

Ö Unload the balance and press the TARE button, the zero

display appears.

0.0

PRE-TARE-

Function

MODE

CAL

Using this function the weight of a tare vessel is stored. Even

after turning off/on the weighing balance will continue working

with the saved tare value.

Ö In weighing mode put tare vessel on the weighing plate

Ö Press repeatedly the MODE key until „PtArE“ flashing

appears.

Ö Use SET key to store the current weight on the weighing

plate as a PRE-TARE value.

Delete PRE-TARE

value

MODE

CAL

Ö Remove all loads from the balance and press repeatedly the

MODE key until „PtArE“ flashing appears.

Ö Use the SET key to confirm. The PRE-TARE value is

deleted, the zero display appears.

FCB-BA-e-0911