User manual

FCB-BA-e-0911

Major display deviations (incorrect weighing results) may be experienced should

electromagnetic fields (e.g. due to mobile phones or radio equipment), static

electricity accumulations or instable power supply occur. Change location or remove

source of interference.

6.2 Unpacking/erection

Carefully remove the balance from the packaging, remove plastic cover and setup

balance at the intended workstation.

The balance must be installed in a way that the weighing plate is exactly in horizontal

position.

• Place the balance on a horizontal and solid base.

• Remove the transport security on the 4-point support.

• Pull off the protection foil from the weighing plate if existing.

• Attach the weighing plate.

Scope of delivery / serial accessories

• Balance

• Weighing plate

• Transit Securing

• Mains power supply

• Protective cover

• Operating Manual

6.3 Mains connection

Power is supplied via the external mains adapter. The stated voltage value must be

the same as the local voltage.

Only use original KERN mains adapters. Using other makes requires consent by

KERN.