User manual

9.4 Interface parameters

Data output is carried out via interface RS 232 C.

General

The previous condition for the data transfer between balance and a peripherical

device (e.g. printer, PC ...) is that the appliances are set to the same interface

parameters (e.g. baud rate, transfer mode ...).

Data transfer

mode

0.0

Ö In weighing mode keep the PRINT key pressed until [Unit]

appears.

Ö Press the MODE button several times until „Pr“ is displayed.

Ö Acknowledge using SET key, the current setting is displayed.

Ö Select the desired settings by pressing the MODE key

rE CR

Data output via remote control commands

Pr PC Data output using the PRINT key

AU PC

Continuous data output

bA Pr

Output on bar code printer

AU Pr

Autom. data output of stable weighing values

Ö Use the SET key to confirm selection. The balance returns to

weighing mode.

FCB-BA-e-0911