User manual

9 Menu

Changes are only allowed on the functions (weighing units) and

(automatic switch-off function).

Ö In weighing mode keep TARE button depressed for approx. 3 sec until "SETUP"

is displayed followed by "UNIT"

Ö Press the HOLD button as often as necessary until the required function is

displayed.

Ö Press the TARE button to confirm the selected function. The current setting will

be displayed. Using the HOLD  or TARE  button, select the desired

parameter. Use the HOLD button to return to the menu.

Ö To exit the Menu and save, press the HOLD button as often as required until

"END" is displayed and then confirm by pressing TARE. The balance returns

automatically into weighing mode.

Navigation:

Not documented

Factory settings are marked by *.

EOB/EOE_L/EOE_XL/EOS-BA-e-1030