User manual

EMS-BA-e-1213 13
7 Operation
Start-up
 Press the ON-OFF key.
The balance will carry out a self-test The balance is
ready for weighing when the weight display appears.
8.8.8.8
0
g
Switching Off
 Press ON-OFF button, the display disappears
0
g
Weighing
 Position item to be weighed
 Read the weighing result in the display
If the material to be weighed is heavier than the weighing
range, the display will show "Error" (=Overload).
Taring
 Place an empty weighing container, the weight of the
weighing container will be displayed.
134
g
(Example)
 Press the TARE button, the zero display disappears.
The tare weight is saved until it is deleted.
0
g