User manual

EMS-BA-e-1213 15
Weighing units
switch-over
 Press the UNIT key in the weighing mode to switch-over
between the available weighing units
Plus/minus
weighings
For example unit weight control, fabrication control etc.

Put the nominal weight on the weighing plate and tare using
the TARE button.
 Remove the nominal weight
 Put the test objects subsequently on the weighing plate, the
respective deviation from the nominal weight is displayed
with the respective sign to „+“ and „-“.
According to the same procedure also packages with the
same weight can be produced, referring to a nominal
weight.
 Back to weighing mode by pressing the TARE button.