User manual
EMB-BA-defsi-0522
23
7 Operation
7.1 Overview of the keypad
Key Pressed briefly Pressed for 10 sec
Switching the balance on
Tara-Function
Unit changing
Switching the balance off
Adjusting function
7.2 Operating instructions
7.2.1 Weighing
• The balance is switched on by pressing the key.
• The balance performs auto-diagnostics (for 2 s) and then displays "0".
• If the weighing object is heavier than the weighing range the display indicates
"E" (=Overload).
• The balance is switched off by pressing the key once.
7.2.2 Taring
• Place tare cup on the weighing plate and press
key. The weighing indica-
tion changes now to "0".The weight of the cup is now memorised.
• Fill weighing object in the cup, read measuring value.
• By pressing
key, after the terminated weighing operation "0" appears again
in the display.
The taring procedure can be repeated several times, for instance to produce a mix-
ture of several components.
The limit is reached when the total weighing range has been used.
After removal of the tare cup the total weight appears as a negative value with „-„
mark.