Instructions

EMB-S-BA-e-1612
12
6 Operation
6.1 Weighing
Start balance by pressing .
The weighing scale will
perform a self-test and change to zero display.
If the material to be weighed is heavier than the weighing
range, the display will show "E" (=Overload).
To turn off weighing scale, press the button . “oFF“ will
appear on the screen before the weighing scale is turned
off automatically.
6.2 Taring
In weighing mode, put tare vessel on weighing pan and
press .
The display will show “0“, indicating that the
weight of the vessel has been saved internally.
(example)
Place material to be weighed; read measured result.
(example)
If one after finishing the weighing process presses again the button, „0“ appears
anew in the display.
The taring process can be repeated any number of times, e.g. when adding several
components for a mixture (adding).
The limit is reached when the whole weighing range is exhausted.
After removing the taring container the total weight is displayed as negative display.