User manual

CPB-N / CPB-DM-BA-e-1323

Determine lower limit value for target

weight:

 Enter the lower limit value via the

numeric keyboard, e.g.: 90 g

 Confirm within 5 sec:

Press repeatedly until the balance

is in weighing mode

Start tolerance check

 Place the load, wait until the acoustic signal sounds, depending on the settings

in the menu „F10“ (see chap. 11.2, only for non-verified models).

Delete limit values:

 For all limit values enter „0“ and confirm using the TARE button.

11 Change readability (only models CPB-M)

In order to change the readability, keep pressed. The last decimal point

flashes for approx. 3 sec. Within this period the value can be read-off in another

resolution.

This value is not verified!