User manual

ALT-A02/PLT-A01-BA-e-1310 3
1 Introduction
The density sets ALT-A02 and PLT-A01 differ in the support of the weighing plate.
For the density set suitable for your balance, please refer to the following overview.
KERN ALT-A02 KERN PLT-A01
Set for density determination for
analytical and precision balances
d= 0.1 mg / 1 mg
Set for density determination for
precision balances
d= 10 mg
KERN ALT-B / PLT-A / PLT-F,
ALS-A / ALJ-A, PLS-A / PLJ-A,
PLS-F / PLJ-F,
PLE-N
KERN PLT-A, PLT-F
PLS-A / PLJ-A,
PLS-F / PLJ-F
• In order to guarantee a safe and trouble-free operation, please
read carefully the operating instructions.
• These operating instructions only describe the operation of the
density determination set. For further information on how to
operate your balance please refer to the operating instructions
supplied with each balance.