User manual

26 ALT-A02/PLT-A01-BA-e-1310
 Confirm input by pressing the PRINT button. The display for weight
determination of the "Sinker in air“ appears.
 Confirm by pressing the PRINT button.
If weighing balance does not show Zero, press TARE.
 Attach the sinker centrically.
 Wait for stability display [ ], take over the weight value „sinker in air“ using the
PRINT button.
 Wait until the display for weight determination of „sinker in test liquid“ appears.
 Confirm by pressing the PRINT button.
 Remove the sinker and if required tare by using the TARE button.
 Fill the glass beaker with test liquid