User manual

3 Installing the density determination set
• If necessary, carry out necessary adjustment before installation of the density
set.
• When the density set is installed, correct adjustment is not possible.
• For reasons of adjustment, take away the density set and place the standard
weighing plate.
1. Switch off balance and separate it from the power supply.
2. Remove standard weighing plate,
screening ring and weighing plate
carrier.
3. Insert balance tray holder
carefully
4. Place the platform for glass
containers in a way that it does not
touch the balance tray holder.
5. Hook up the combination weighing
tray. Ensure that it hangs centrically
in the recess of the weighing tray
holder.
ABS-A02-BA-e-1010 7