User manual

5.3 Enter volume of the glass sinker
Ö In the gram display press the CAL/MENU button repeatedly
until „SettinG“ appears.
Ö Press the TARE/ button.
Ö Press the CAL/MENU button repeatedly until „Sv SEt“ appears
(Example)
Ö Press the TARE/ button, the currently set volume is
displayed. In the upper part of the display panel, the
symbol and the # symbol appear in order to indicate numerical
input status. The first digit is flashing and can be changed.
(Example)
Ö Use the UNIT/ button to increase the numerical value of the
flashing digit.
Use the PRINT/ button to shift the digit selection to the right,
the active digit is flashing
Confirm input by the TARE/ button.
Ö Repeatedly press the ON/OFF key until the balance is in
weighing mode.
14 ABS-A02-BA-e-1010