Instructions

8 911-013-BA-e-1711
6.3 Line feed
Press the „LF“ button in standby mode (“SEL” display off); this makes the line feed
start without data being printed. To stop the line feed, again press the „LF“ button.
6.4 Start-up
The printer will be ready for operation immediately after it has been connected to
the power supply; the LED „P“ will light up.
6.5 Paper
 Detach the cover of the paper compartment (See illustration) by pulling the
cover upwards in the direction of the arrow.
Preparation of paper
 Prepare paper properly (See illustration)
ok
ok
not ok
not ok