User manual

572/573/KB/DS/FKB/FCB/KBJ-BA-e-1370
37
7.5.1 Description of the data transfer
Structure of each data transfer:
Bit-Nr.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
B*
N
N
N
B
B
B
B
B
0
.
0
0
E
E
E
CR
LF
N = Numerator
B*: = Blank or in the range of zero point.
B, 0,
.
, g: = Blank or weighing value with unit, depending on the load on the weighing plate.
E = Unit
CR: = Carriage Return
LF: = Line Feed
7.5.2 Numerator
The Numerator is found under the menu point “Printer” and can be activated and deacti-
vated. When editing data with the use of the print option, the range of the numerator will
increase by one place.
7.6 Printer
With the serial data output RS 232 a printer can be connected.
The printout shows the weight in grams. When the counting mode is selected the number
of pieces or the weight is printed. When the percent mode is selected, the percentage or
the weight will be printed. Press The PRINT-key to print weighing results. Select the enu-
merator to number the weighing continuously. Turn off the balance or use the CLEAR
function to Reset the enumerator to (000).