User manual

9.3.3 AU PC

The weighing values are sent automatically and continuously, no matter if the value is

stable or unstable.

e. Format for stable values for weight/quantity/percentage

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

B B B B B B B B 0 . 0 B g B B C

f. Format in case of fault

1 2 3 4 5 6 7 8 9 10 11 12 13 14

B B B B B B B E r r o r CR LF

g. Format for unstable values for weight/quantity/percentage

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

B B B B B B B B 0 . 0 B CR LF

9.3.4 rE Cr

The remote control commands s/w/t are sent from the remote control unit to the

balance as ASCII code. After the balance having received the s/w/t commands, it will

send the following data.

Take into account that the following remote control commands must be sent

without a subsequent CR LF.

s Function: Stable weighing value for the weight is sent via the RS232

interface

w Function: Weighing value for the weight (stable or unstable) is sent via the

RS232 interface

t Function: No data are sent, the balance carries out the tare function.

h. Format for stable values for weight/quantity/percentage

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

B B B B B B B B 0 . 0 B g B B C

i. Format in case of fault

1 2 3 4 5 6 7 8 9 10 11 12 13 14

B B B B B B B E r r o r CR LF

j. Format for unstable values for weight/quantity/percentage

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

B B B B B B B B 0 . 0 B CR LF

440-BA-e-0941