User manual

8.6 Selection printed edition
Use this function to select which data are sent via the RS232C interface.
To achieve this, follow the sequence of operations below: (is not valid for the data
transfer mode BAPr )
Switch-on the balance using the key and wait for the „0“ display.
Press the key and keep it pressed until „UNIT“ appears on the display.
Press the key twice, in the display appears „LAPr“.
Confirm by pressing the key
Now it is possible to scroll forward in the available edition parameters using the
key, to scroll backward, use the key.
After actuating the key, the current state is displayed ( on / off ).
Use the or the key to change the state.
After that the current state is saved using the key and the menu is left.
By that way the user can configurate his own data block, which then is sent to a
printer or to a PC.
Display Status Function
„Hdr“ On / Off
Edition of the headlines
„GrS“ On / Off
Edition of the total weight
„Net“ On / Off
Edition of the net weight
„tAr“ On / Off
Edition of the tare weight
„N7E“ On / Off
Edition of the stored weight
„PCS“ On / Off
Edition of quantity
„AUJ“ On / Off
Edition of the unit weight
„rqt“ On / Off
Edition of the reference quantity
„FFd“ On / Off
Edition of a page feeding
440-BA-e-0941
26