Owner manual

SFB-BA-e-1324

7 Operation

7.1 Start-up

 Press , and the instrument will carry out a self-test. The instrument is ready

for weighing when a weight display appears.

7.2 Switching Off

 Press until the display disappears.

7.3 Zeroing

Resetting to zero corrects the influence of light soiling on the weighing plate.

Resetting range ± 2 % max.

The instrument comprises an automatic zero setting function, however, the

instrument can be reset to zero whenever needed as described below.

 Remove load from weighing system

 Press , and the zero display as well as the ZERO indicator will appear.

7.4 Simple weighing

 Place goods to be weighed on balance.

 Wait for stability display STABLE.

 Read weighing result.

Overload warning

Overloading exceeding the stated maximum load (max) of the device, minus

a possibly existing tare load, must be strictly avoided. The instrument may be

damaged by overloading.

Exceeding of maximum load is indicated by “----“ as well as a signal sound.

Remove load from weighing system or reduce preload.