Owner's manual

6.9.1 Service mode
This overview of the service parameters is merely for checking the parameters
set by the appropriate Bureau of Standards. No changes may be made.
Access to menu:
1. Switch-on balance and during the selftest press .
2. Use the numeric keys to enter „0000“ for a password and confirm by .
3. Confirm password with
4. The first function „F0 CAL“ is displayed. Press adjusting switch.
Select function:
 You can select individual functions containing the current settings one after the
other by using or a numeric key (i.e. for F0 or 2 for F2).
Change / save settings:
 Confirm selected function by pressing . Select desired setting by pressing
and confirm by pressing or cancel by pressing .
Exit menu:
 Using the balance returns into the weighing mode.
RPB_D-BA-e-1425 19