Datasheet

KERN – Professional measuring.
DKD-K-11801
Member
KERN & SOHN GmbH • Ziegelei 1 • 72336 Balingen • Germany • Phone + 49-7433-9933-0 • Fax + 49-7433-9933-149 • www.kern-sohn.com • [e-mail]
Internal adjusting (CAL): Quick setting of the
balance’s accuracy with internal adjusting
weight (motordriven).
Weighing with tolerance range: Upper and
lower limiting can be programmed individually,
e.g. dosing/sorting.
GLP/ISO record keeping of weighing data
with date, time and identifi cation-no.
Only with printers from KERN.
Rechargeable battery pack:
rechargeable set.
Piece counting: Reference quantities
selectable. Display can be switched from
piece to weight
Dynamic weighing: Strong vibrations
are fi ltered out to determine a stable weighing
result.
Stainless steel: the balance is protected
against corrosion.
Suspended weighing: load support with hook
on the underside of the balance.
Percentage determination: Determining the
deviation in % from the target value (100%).
Power supply: integrated in balance.
230V/50Hz in Germany. On request GB,
AUS or USA version.
Adjusting program (CAL): For quick setting
of the balance’s accuracy. External adjusting
weight required.
Spray and dust protection IPxx
The type of protection is shown by the
pictogram. For details see the glossary.
Net-total weighing: weight of tare cup
and weight of components memorized in two
separate stores.
Mains adapter: 230V/50Hz in standard
version for Germany. On request GB,
AUS or USA version.
Data interface: The type of interface is shown
by the pictogram. See the glossary
for further details.
Battery operation: The battery type is
specifi ed for each device.
Weighing units: Can be switched to e.g. non-
metric units at the touch of a key. See balance mo-
del. Please refer to KERN‘s website for more details.
Tare: put back displayed value to “0” during
weighing process, e.g. to add or remove weig-
hing material from a container.
Verifi cation possible: The time required for
verifi cation is specifi ed in the pictogram.
DKD calibration possible: The time
required for DKD calibration is specifi ed
in the pictogram.
[
DMS
] For details on weighing technologies,
see the glossary.
Package shipment via courier. Pallet shipment via freight forwarder.
Warranty: The warranty period is shown in the
pictogram.
Precision is our business
KERN Pictograms
Your KERN specialist dealer:
To ensure the high level of precision of your balance, KERN off ers the
appropriate test weight package for your balance. This consists of the
test weight, box and DKD calibration certifi cate, as proof of its accuracy.
The best way to ensure proper balance calibration.
In the extensive KERN test weight range, you will fi nd test weights in the
international OIML error limit classes: E1, E2, F1, F2, M1, M2, and M3
with weights from 1 mg to 2000 kg.
The KERN DKD calibration laboratory for electronic balances and weights
has been accredited by DKD since 1994 and today is one of the most
modern and best-equipped DKD calibration laboratories for balances,
test weights and force-measurement in Europe.
(DKD = German Calibration Service)
Thanks to the high level of automation, we can carry out DKD calibration
of balances, test weights and force-measuring devices 24 hours a day,
7 days a week.
Range of services:
• DKD calibration of balances with a maximum load of up to 6000 kg
• DKD calibration of weights in the range of 1 mg – 500 kg
• Database supported management of checking equipment and
reminder service
• Calibration of force-measuring devices
• DKD calibration certifi cates in the following languages
D, GB, F, I, E, NL, PL
Do you have questions about your scale, the corresponsing test weight
or the calibration service ? Your KERN specialist dealer will be pleased to
assist you.
Measuring technology and testing services from a single source