Instruction Manual

3.
Data output format
(Setting P Prt, P Auto, P Cont only!)
The currently set data output format will be displayed after the Baud rate has
been confirmed. Select desired format by and confirm with .
only at setting P Prt, P
Prt 0-3
Data output format, see chap. 13.3
Only when set P Cont
Cont 1 Default
Sd0 – on/off
Continuous data output,
selectable “Sending 0” yes /
no
Cont 2
Not documented
Cont 3
Not documented
4.
Printer type
The currently set printer type will be displayed after the data output format
has been confirmed.
Select desired printer type by pressing and confirm with .
LP 50
Not documented
tPUP
Use this setting
Service menu
Pin
Password Input: Press , ,
subsequently.
Operate adjustment switch; for position see chap.15
Display speed
15*
Not documented
30
60
7.5
Adjustment, see chap. 18
tri*
Not documented
CoUnt
Not documented
rESEt
Reset weighing scale to factory setting
SEtGrA
Not documented
MPC_M / MPE_HM / MPE_PM-BA-e-1414 41