User Manual

MLS_C-BA-e-1330 61
Press the arrow keys ( ), to select “Shutoff“
Press the  -key for the current setting to appear
Press the -key; the current menu item blinks
Press the arrow keys ( ), to select desired shutoff
criterion. For further details, see chpt. 9.1.2 “Shutoff
Criterion“.
Confirm entry by pressing the PRINT-key and enter
additional parameters as follows.
5. Unit of measured result in display or printout
(can be switched between %M, %D, %R, g)
Press the arrow keys ( ), to select “Result“
Press the  -button and the current setting will flash
Press the arrow keys ( ), to select desired setting.
For further details see chpt. 9.1.2 “Unit of Measured
Result“.
Confirm entry by pressing the PRINT-key and enter
additional parameters as follows.
6. Output interval
This is used to set at which interval interim results are to be printed.
Press the arrow keys ( ), to select “Printout Time“
Press the  -button and the current setting will flash
Press the arrow keys ( ), to select desired setting.
For further details see chpt. 9.1.2 “Output Interval“.
Confirm entry by pressing the PRINT-key and enter
additional parameters as follows.