KERN & Sohn GmbH Ziegelei 1 D-72336 Balingen email: info@kern-sohn.com Phone: +49-[0]7433- 9933-0 Fax: +49-[0]7433-9933-149 Internet: www.kern-sohn.com Operating Manual Bathroom Balance KERN MGB Version 1.
GB KERN MGB 150K100 Version 1.0 08/2008 Operating Manual Bathroom Balance Table of Contents 1 Technical Data__________________________________________________ 3 2 Basic Information (General)_______________________________________ 4 3 1.0 Proper use _______________________________________________________ 4 2.0 Improper Use ____________________________________________________ 4 3.
1 Technical Data KERN MGB 150K100 Readability (d) 0.1 kg Weighing range (max) 150 kg Weighing Units Accuracy Electric Supply Battery service life kg, lb +- 0.5% +- 0.1kg Battery operated 1 x CR2032 ( 3V ) 5 years at 3 weighings daily Auto Off after 6 seconds Operating temperature + 5°C … + 35°C Storage temperature - 10°C … + 60°C Humidity of air Housing (B x D x H) mm Weight kg (net) MGB -BA-e-0810 max. 80 % (not condensing) 290 x 290 x 40 2.
2 Basic Information (General) 2.1 Proper use These balance is used to calculate the weight of people in the private sphere. Utilisation of this balance in the medical field is not permissible. The weighing process requires that the person stands on the weighing plate in a way that provides even weight distribution over the entire weighing plate. As soon as a stable weighing value is reached the weighing value can be read. 2.2 Improper Use Do not use balance for dynamic weighings.
3 Basic Safety Precautions 3.1 Pay attention to the instructions in the Operation Manual Caution: There is a danger of slipping when stepping on the glass weighing plate. If required, stick the self-adhesive rubber strips included in the delivery to the weighing plate. Stepping on the edge of the weighing plate may cause tilting of balance or fall of person. Carefully read this operation manual before setup and commissioning, even if you are already familiar with KERN balances.
If electro-magnetic fields or static charge occur, or if the power supply is unstable major deviations on the display (incorrect weighing results) are possible. In that case, the location must be changed. 5.2 Unpacking Take the whole balance out of their packaging and place them at the intended position. In addition to the balance, delivery also includes the operating instructions and a battery. 5.
Error message Messages can be displayed when the balance are switched on or in operation: E: The maximum weighing range of the balance was exceeded. Unload weighing plate. ---- The person present on the weighing plate is not standing quietly. The weighing value will be displayed as soon as the person stands quietly. Lo : Battery is empty, please replace. 8 Service, maintenance, disposal 8.
9 Instant help In case of a fault in the program sequence, the balance should be shortly switched off. The weighing process must then be restarted from the beginning. Help: Fault Possible cause The displayed weight does not glow. • The balance is not switched on. • • Battery is inserted incorrectly or is empty. No batteries inserted. • Draught/air movement • • Table/floor vibrations The weighing plate is in contact with foreign bodies or is not correctly positioned.
