User Manual

KFE-TM-BA_IA-e-1313 21
3. How to set tolerance weighing mode
 Press repeatedly until is displayed.
 Acknowledge with .
 Press repeatedly until BEEP is displayed.
 Press and current setting will be displayed.
 Select desired setting (bp 1, bp 2, bp 3) with and
confirm by pressing .
 Press repeatedly to exit menu. The weighing system is
in tolerance weighing mode, i.e. from here occurs the
graduation if the weighed material is within the two tolerance
limits.
4. Weighing with tolerance range
 Tare when using a weighing container
 Put on goods to be weighed, tolerance control is started
Load below specified
tolerance
Load within specified
tolerance
Load exceeds specified
tolerance
The indicator [LO] is
displayed
The indicator [OK] is
displayed
The indicator [HI] is
displayed
The tolerance control is not active when the weight is under 20d.
To delete limits, enter “00.000 kg“.