Instruction Manual

• Connect the mains connection to the power supply of 230V AC.

• For prolonged periods of inactivity disconnect the balance from the power supply.

• Press the ON/OFF button and hold for approx. 1 second.

• After turning on the balance will carry out a self-test.

• Afterwards the balance will change to zero display, thus indicating readiness for

operation.

• The following icons will appear:

Zero indicator

Stability display

Weighing mode / weighing unit

6 Changing the installation site of the balance

• When the balance is to be taken to a different installation site

please follow the precautionary measures stated under chapter 5

of these operating instruction.

Doc.No.IEX-BA-e-1412 11