User guide

Sauter GmbH
Ziegelei 1
D-72336 Balingen
E-Mail: [e-mail]
Tel: +49-[0]7433- 9933-199
Fax: +49-[0]7433-9933-149
Internet: www.sauter.eu
Instruction Manual
HMR
HMR-BA-e-1212 8
6.7.3 Data Transfer
【 Transfer 】 has to be pressed to export the values stored
in memory as text format to PC by USB port.
6.7.4 Delete by Group No.
【 Delete by No. 】 :The range of deleted groups is
displayed. The digit figure keys have to be pressed to input
the number.
【 ETR 】 has to be pressed to delete the selected groups.
【 ESC 】 has to be pressed to cancel the operation.
Note: 1.If the present group exceeds the actual range,
the actual groups among them will be deleted!
2. The instrument may not be powered off while
deleting data. This could lead to unpredicted
consequences!
6.7.5 Delete all Data
By pressing 【 Delete All 】 , all data in memory will be
deleted.
6.7.6 Deletion Confirmation
The key or the key has to be pressed to
move the cursor to 【 YES 】 and 【 】 key deletion.
The key or the key has to be pressed to
move the cursor to 【 NO 】 and 【 ETR 】 has to be pressed
to cancel deletion.
【 ESC 】 has to be pressed to cancel deletion, no matter
where the cursor is located.
6.8 Browsing Memory Data Groups
The 【 】 or 【 】 key has to be pressed to see previous
or next page.
【 ESC 】 has to be pressed to exit browsing.
【 ETR 】 has to be pressed and then 【 】 or 【 】 to
move the cursor to the desired line you want to see the
details from. 【 ETR 】 has to be pressed to see details of
that group.
The 【 】 or 【 】 key has to be pressed to browse details
including average value, test set and each single value.
【 ESC 】 has to be pressed to return to previous display.
6.9 System Set
At the main display interface, 【 MENU 】 key has to be
pressed to enter the main menu.
【 】 or 【 】 key has to be pressed to move the cursor
to 【 System Set 】 Menu. 【 ETR 】 has to be pressed to
enter 【 System Set 】 Menu.
Auto Save: Off
Auto Print: Off
Auto Delete: Off
Auto Trans: Off
Key sound: On
Warn. Sound: On
LCD Brightness
Time Date Set 日
【 】 or 【 】 key has to be pressed to move the cursor
to the desired item.
By pressing, the setting can be directly modified or into the
corresponding screen. 【 ESC 】 has to be pressed to exit.
【 Auto Save 】 , 【 Auto Delete 】 , 【 Auto Trans. 】 , 【 Key
Sound 】 , 【 Warn. Sound 】 can be switched on or off now.
If 【 Auto Save 】 is set to <On>, according to 3б rule, gross
errors can be cancelled automatically after having
measured preset average times or pressing end in
advance. If there is any data cancelled, it needs
supplemental measurement to reach the preset times.
If 【 Auto Trans. 】 is set to <On>, the value of the present
group can be exported by USB after measuring and
displaying the average value.
If 【 Key Sound 】 is set to <On>, the buzzer will make a
short hoot while a key is being pressed each time.
No.001 12/03 652HL
No.002 12/03 587HL
No.003 12/03 820HL
No.004 12/03 693HL
No.005 12/03 783HL
No.006 12/03 782HL
No.007 12/03 579HL
No.008 12/03 687HL
No.002 12/03 785HL
No.003 12/03 516HL
No.004 12/03 789HL
No.005 12/03 570HL
No.006 12/03 852HL
No.007 12/03 523HL
No.008 12/03 796HL
No.001 12/03 514HL