User Manual

Sauter GmbH
Ziegelei 1
D-72336 Balingen
E-Mail: [e-mail]
Tel: +49-[0]7433- 9933-199
Fax: +49-[0]7433-9933-149
Internet: www.kern-sohn.com
Instruction Manual
HK-D
HK-D-BA-e-1311 12
Press 【
】 or【 】 key to move the cursor to the
function required, then press 【 ENTER】 key.
6.7.1 Viewing from the No.1 group/ Viewing from the
end group
Press 【 View from No.1】 key to display data in memory
from the No.1 group.
Press 【 View from End】 key to display data in memory
from the end group.
6.7.2 Viewing from selected group
Press 【 View from No.】 key, selecting interface will be
displayed
Press number key to input the value.
Press 【 ENTER】 key to display data in memory from the
starting group selected.
Press 【 ESC】 key to cancel operation.
6.7.3 Transferring data
Press 【 Transfer】 key to output the data in memory via
RS232 interface in text format.
6.7.4 Deleting selected group
Press 【 Delete by No.】 key, an interface including group
range to be deleted will be shown.
Press number key to input digital value.
Press 【 Enter】 key to cancel selected group.
Press 【 Esc】 key to cancel the operation.
Note: 1. If the input group number exceeds the actual
range, then deletes the actual group among them.
2. No difference for the sequence to the starting and
ending group, that is to say if 1~5 groups will be
deleted, the sequence can be set from 1 to 5 or from 5
to 1.
3. Data group No. saved in memory will be reordered
after deletion.
4. When deleting data, especially small group data,
because the following data needs to be moved, max 30
seconds (approx.) may be required. Never to turn off
power at this time, or data confusion can be caused.
6.7.5 Delete all
Press 【 Delete All】 to cancel all data in memory.
6.7.6 Confirm deletion
Confirming interface will be displayed when deleting data
in memory.
Press 【
】【 】 key to move cursor to 【 YES】 ,
then press 【 ENTER】 key to delete the data.
Press 【
】【 】 key to move cursor to 【 NO】 , then
press 【 ENTER】 key to cancel the operation.
6.8 Viewing interface
The No., dates and average values of 8 data groups can
be displayed at most in the same interface.
Press【
】 or 【 】 key to turn over pages.
Press 【 ESC】 key to exit view.
By pressing 【 ENTER】 key, cursor will be shown and
furthermore details can be viewed.
Press 【
】 or 【 】 key to select the group in this
interface.
Press 【 ESC】 key to return to the previous viewing
interface.
Press 【 ENTER】 key to view detail information in this
group.
Press 【
】 or 【 】 key to turn over pages to view
average value, measuring condition or single measured
value.
Press 【 ESC】 key to return to the previous viewing
interface.
6.9 System Set
When in the main display interface, press 【 ESC】 key to
enter the main menu.