Manual

HFT-BA-e-1310 3
5.1 Safety instructions _________________________________________________________________ 18
5.2 Loading the crane scales ___________________________________________________________ 19
5.3 Turn on/off _______________________________________________________________________ 22
5.4 Set balance to zero ________________________________________________________________ 22
5.5 Taring ___________________________________________________________________________ 23
5.6 Weighing _________________________________________________________________________ 23
5.7 Fix the weight value (Data-HOLD function) ____________________________________________ 24
5.8 Weighing Units ____________________________________________________________________ 24
5.9 Totalization _______________________________________________________________________ 26
5.10 Automatische Nullpunktkorrektur ____________________________________________________ 29
6 Menu ________________________________________________________ 30
6.1 Navigation in the menu: ____________________________________________________________ 30
6.2 Menu overview ____________________________________________________________________ 31
7 Adjustment ___________________________________________________ 33
8 Data output RS 232 ____________________________________________ 35
8.1 Technical data ____________________________________________________________________ 35
8.2 Technical data ____________________________________________________________________ 35
8.3 Continuous data output ____________________________________________________________ 35
8.4 Printer mode ______________________________________________________________________ 36
9 Error messages _______________________________________________ 37
10 Cleaning, Maintenance and Disposal ______________________________ 38
10.1 Cleaning and Disposal _____________________________________________________________ 38
10.2 Regular maintenance and care ______________________________________________________ 39
10.3 Regular maintenance ______________________________________________________________ 39
10.4 Checklist „regular maintenance“, (see chapter 10.3) ____________________________________ 40
11 Enclosure ____________________________________________________ 43
11.1 Checklist „Enhanced maintenance“ (General revision) __________________________________ 43
11.2 List „spare parts and repair of safety-relevant parts“ ____________________________________ 44