User guide

P1 rEF
AZn
off
Automatic zero correction (auto-zero) on
change of display,
Digit options include
0.5d, 2 d, 4 d..
Modifications may only be carried out by a specialist with competent knowledge.
Adjustment or linearization is required after each configuration; see chap. 7.1 or 7.2.
0.5 d
2 d
4 d
0AUto
P0
Load range where the display after
switching-on the balance is automatically set
to zero.
Options include 0, 10, 20, 30, 50, 100 %
P10
P20
P50
P100
0rAnG
P0
Load range where the display is set to zero
by pressing .
Options include 0, 2, 4, 10 , 20%.
P2
P4
P10
P20
P2 CAL
SiGrA
Single range
scale
dESC Position of the decimal dot
inC Readability (d)
CAP Capacity (max)
CAL Adjustment procedure see chap. 7
dU rA
Dual range
scale
dESC Position of the decimal dot
inC
div 1
Readability [d] 1. Weighing range
div2
Readability [d] 2. Weighing range
CAP
cap 1 Balance capacity [max] 1.
Weighing range
cap 2 Balance capacity [max] 2.
Weighing range
CAL Adjustment procedure see chap. 7
dU in
Multi-interval
scale
dESC Position of the decimal dot
inC
div 1
Readability [d] 1. Weighing range
div2
Readability [d] 2. Weighing range
CAP
cap 1 Balance capacity [max] 1.
Weighing range
cap 2 Balance capacity [max] 2.
Weighing range
CAL
commo
Adjustment procedure see chap. 7.1
LinE0
Linearization procedure see chap. 7.2
P3 inP 12345 Display internal resolution
P 4 HLd
Hold Data-HOLD function see chap. 5.8
PEAK Peak value function see chap. 5.9
HFC-BA-e-1511 37