Owner's manual

8.2 Carry out linearization
 Turn off balance and attach suitable lifting tackle.
 Turn on balance with the lifting tackle attached and press
during self-test. The first function „F0bk“ is displayed.
 Press repeatedly until „F5CAL“ is displayed.
 Press , the last parameter set will be displayed.
• „nonLi“ Adjustment of balance
or
• „LinE“ Linearisation of balance
 Select „LinE“ by
 Press , “LoAd 0“ will appear. Make sure that no loads
apart from the lifting tackle are attached to the hook.
 Wait for stability display and press again. “LoAd 1“
(1/3 max) will be displayed.
 Attach first adjustment weight, wait for stability display
Press , “LoAd 2“ (2/3 max) will be displayed.
HFA-BA-e-1511 35