User Manual

ManualsBrandsKERN & SOHN ManualsScalesFKT 60K1L

KERN & Sohn GmbH

Ziegelei 1

D-72336 Balingen

E-Mail: info@kern-sohn.com

Phone: +49-[0]7433- 9933-0

Fax: +49-[0]7433-9933-149

Internet: www.kern-sohn.com

Printed form design touch scales

KERN

Version 1.0

12/2014

FKT_IKT_PKT_FKA-ZB-e-1410

Summary of content (7 pages)

PAGE 1
KERN & Sohn GmbH Ziegelei 1 D-72336 Balingen E-Mail: info@kern-sohn.com Phone: +49-[0]7433- 9933-0 Fax: +49-[0]7433-9933-149 Internet: www.kern-sohn.com Printed form design touch scales KERN Version 1.
PAGE 2
1. Installation - 2 How to copy the complete contend of the “Touch Printed Form“ folder to an index of your choice Connect the weighing scales to the PC with the help of a serial interface cable (wiring 1:1) Start “printform.
PAGE 3
2. Write the form file to the weighing scales (upload) - Open file> Open existing form file Write the forms to the weighing scales by pressing the UPLOAD button Where required, you may need to set the correct Com port and the correct Baud rate, .. via the “extended“ switch.
PAGE 4
3. Create form You can create and save up to 16 forms To create a new form, press the “New Form“ button. Name and add your new form.
PAGE 5
You can import fixed wording from the templates to the form box. Additional fixed wording can be created from scratch or changed via “text templates“. Afterwards you can allocate the variables to the information texts (fixed wording).
PAGE 6
You must save your new form to a folder.
PAGE 7
To change the name or number of a form, go to the “Edit Form“ button. 4. How to edit a form Templates support the design of a printed form - Texts Text templates can be moved to the form box by using drag and drop. Another option is to double-click the desired place in the form box, which then allows you to add new text. Texts in the form box are presented in red. - Variables (such as weighing values) are moved to the desired place by using drag and drop. Variables on form box are presented in blue.