Manual
Table Of Contents
- 1 Technical Data
- 2 Basic Information (General)
- 3 Basic Safety Precautions
- 4 Transportation & Storage
- 5 Unpacking, Setup and Commissioning
- 6 Operation
- 6.1 Starting the scales and switching on the screen
- 6.2 Menu paths for basic settings / operating modes
- 6.3 Operator/location selection
- 6.4 Starting the stock-tacking
- 6.5 Article selection – Inventory calculation and saving
- 6.6 Inventory deletion / Article repeat / Inventory list
- 6.7 Stock-taking with automatic list:
- 6.8 Scanner selection
- 6.9 Automatic registration activation:
- 6.10 Operator and location input
- 6.11 Activation / Deactivation of zero passing
- 6.12 Data Transfer PC-FKA, FKA-PC at inventory / article counting:
- 6.13 Creating a stock list
- 7 Data output RS 232 C
- 8 Service, maintenance, disposal
- 9 Instant help
- 10 Declaration of conformity
- Electronic Balance: KERN FKA
9 Instant help
In case of an error in the program process, briefly turn off the balance and disconnect from
power supply. The weighing process must then be restarted from the beginning.
Help:
Fault Possible cause
The displayed weight does not glow.
• The balance is not switched on.
• The mains supply connection has been inter-
rupted (mains cable not plugged in/faulty).
• Power supply interrupted.
The displayed weight is permanently
changing
• Draught/air movement
• Table/floor vibrations
• Weighing plate has contact with other objects.
• Electromagnetic
fields / static charging (choose
different location/switch off interfering device if
possible)
The weighing value is obviously
• The display of the balance is not at zero
wrong
• Adjustment is no longer correct.
• Great fluctuations in temperature.
• Electrom
agnetic fields / static charging (choose
different location/switch off interfering device if
possible)
Should other error messages occur, switch balance off and then on again. If the error mes-
sage remains inform manufacturer.
44 FKA-BA-e-1414