Manual
Table Of Contents
- 1 Technical Data
- 2 Basic Information (General)
- 3 Basic Safety Precautions
- 4 Transportation & Storage
- 5 Unpacking, Setup and Commissioning
- 6 Operation
- 6.1 Starting the scales and switching on the screen
- 6.2 Menu paths for basic settings / operating modes
- 6.3 Operator/location selection
- 6.4 Starting the stock-tacking
- 6.5 Article selection – Inventory calculation and saving
- 6.6 Inventory deletion / Article repeat / Inventory list
- 6.7 Stock-taking with automatic list:
- 6.8 Scanner selection
- 6.9 Automatic registration activation:
- 6.10 Operator and location input
- 6.11 Activation / Deactivation of zero passing
- 6.12 Data Transfer PC-FKA, FKA-PC at inventory / article counting:
- 6.13 Creating a stock list
- 7 Data output RS 232 C
- 8 Service, maintenance, disposal
- 9 Instant help
- 10 Declaration of conformity
- Electronic Balance: KERN FKA
1 Technical Data
KERN FKA 30K-4 FKA 60K-4
Readability (d) 0,1 g 0,2 g
Weighing range (max) 36.000 g 65.000 g
Taring range (subtrac-
tive)
36.000 g 65.000 g
Reproducibility 0,2 g 0,4 g
Linearity ±0,5 g ±1 g
Smallest piece weight 0,1 g 0,2 g
Adjustment points 10 / 20 / 30 kg 20 / 50 / 60 kg
Recommended adjust-
ing weight F1 (not sup-
plied)
20 + 10 kg 50 kg
Humidity of air max. 80% rel. (non-condensing)
Stabilization time
(typical)
3 sec.
Allowable ambient tem-
perature
+10 °C ... + 40 °C
Warm-up time 2 Std.
Housing (B x D x H)
mm
350 x 390 x 120
Vibration filter
yes
Weighing plate stain-
less steel mm
340 x 240
Units
see menu
Weight kg (net) 6,5
Data interface yes (RS232)
Article regular places
Inventory 1000 / Article 500
Memory locations for
manual article recording
30
Battery operation with 6
x 1.5 V, size "C"
yes
4 FKA-BA-e-1414