Manual
Table Of Contents
- 1 Technical Data
- 2 Basic Information (General)
- 3 Basic Safety Precautions
- 4 Transportation & Storage
- 5 Unpacking, Setup and Commissioning
- 6 Operation
- 6.1 Starting the scales and switching on the screen
- 6.2 Menu paths for basic settings / operating modes
- 6.3 Operator/location selection
- 6.4 Starting the stock-tacking
- 6.5 Article selection – Inventory calculation and saving
- 6.6 Inventory deletion / Article repeat / Inventory list
- 6.7 Stock-taking with automatic list:
- 6.8 Scanner selection
- 6.9 Automatic registration activation:
- 6.10 Operator and location input
- 6.11 Activation / Deactivation of zero passing
- 6.12 Data Transfer PC-FKA, FKA-PC at inventory / article counting:
- 6.13 Creating a stock list
- 7 Data output RS 232 C
- 8 Service, maintenance, disposal
- 9 Instant help
- 10 Declaration of conformity
- Electronic Balance: KERN FKA
If the tare weight of the box on the
scales differs from the tare weight of the
archived value, the tare value can be
corrected by pressing the “CHG./TARE”
button.
Press the “Set tare” button to accept the
tare weight after placing the empty box
on the scales.
Press the “Manual Tare” input button to
enter the actual tare value directly.
The quantity will also correct itself as
soon as the tare weight of the new box
has been entered.
Press the OK/TAKE button to accept
and save the calculated quantity.
The instruction to select another article
will be displayed in the second infor-
mation line, once the calculated stock of
articles has been saved.
24 FKA-BA-e-1414