Owner manual

FFN-N-BA-e-1323 28
9.4 Setting the Multi-Tare function

 Start balance by pressing
 While the balance carries out a self test, press and
keep pressed until „F1 CAL“ appears



 Press repeatedly until „F8 tn“ appears
 For verifiable devices press the adjustment switch
 Select function using , the function adjusted as last will
be displayed (PtArE or 0tArE)
 Use to change between the individual parameters
 Use to select „PtAre“
“F8 tn“ appears, now the function is enabled
 Press repeatedly until “bACK“ appears
 Press
The balance carries out a restart and changes to weighing
mode
Now you have the ability to tare several times in a row.