Instruction Manual

EMB-V-BA-e-1422
43
13.4 Interface parameters
Data transfer
mode
 Keep pressed in the weighing mode until [Pr] is displayed.
 Acknowledge using , the current setting is displayed.
 Select desired setting by .
rE CR
Data output via remote control commands
Data output using the PRINT key
AU PC
Continuous data output
 Acknowledge selection by . The balance returns to
weighing mode.
Baud rate
The baud rate defines the transfer speed vie the interface,
1 Baud = 1 Bit/second.
 Keep pressed in the weighing mode until [Pr] is displayed.
 Press repeatedly until "bAUd" is displayed.
 Acknowledge using , the current setting is displayed.
 Use to select the desired settings
9600  4800  2400  1200  19200
 Acknowledge selection by . The balance returns to
weighing mode.
PR�
PR�
BAUD�