Instruction Manual

EMB-V-BA-e-1422
29
+ Enter the density of the sinker.
4. Press and the last digit flashes.
5. Use to increase the numeric value of the flashing cipher.
Use to move the number selection to the right, the respective active
position flashes.
6. Confirm input by .
+ Density determination liquids
7. Place sinker in the upper sample dish.
8. Press and the weight of the sinker in air is displayed.
(example)
9. Lay the sinker in the lower sample dish and immerse it into the test liquid.
Make sure that the sinker is at least 1 cm submerged and that, if possible, no
air bubbles adhere to it.
10. Press and for a short time the weight of the sinker in the test liquid is
displayed.
(example)
The scale determines the density of the liquid and then displays the result.
(example)