Instruction Manual

EMB-V-BA-e-1422
25
+ Density determination “solids“
 Hang the sample on the suspension device.
 Press and the weight of the sample in air is shown.
(example)
 If possible, immersed the sample bubble free in the aid liquid. Make sure that the
sample is at least 1 cm immersed and doesn't touch the glass beaker.
 Press and for a short time the weight of the sample in the aid liquid is
displayed.
(example)

The scale determines the density of the solid.
Wait until the result is displayed.
(example)
When connecting an optional printer, press to print the result, see printout
example chapter 8.2.1.
Using the balance returns into the weighing mode.