Instruction Manual

EMB-V-BA-e-1422
24
Calculate density
+ Access mode for the density determination of solids.
 Start balance by pressing If the scale doe
s not display zero, tare with
 Access by pressing density determination mode for solids.

(example water at 19°C)
"SOLId" is briefly displayed, followed by the actual entered density of the aid
liquid.
+ Enter the density of the aid liquid while taking into account the current
temperature (See density table chapter 10).
 Press and the last digit flashes.
 Use to increase the numeric value of the flashing cipher.
Use to move the number selection to the right, the respective active
position flashes.
 Confirm input by .
(example water at 23°C)