Instruction Manual

EMB-V-BA-e-1422
22
+ Density determination solids
11. Lay the solid in the upper sample dish.
12. Press and the weight of the sample in air is shown.
(example)
13. Lay the sample into the lower sample dish and immerse it in the aid liquid.
Make sure that the sample is at least 1 cm immersed and has, if possible, no
air bubbles adhering to it.
14. Press and for a short time the weight of the sample in the aid liquid is
displayed.
(example)
The scale determines the density of the solid and subsequently displays the result.
(example)
When connecting an optional printer, press to print the result.
Printout example KERN YKB-01N:
D-REF: 0.9976 g/cm^3
Density aid liquid
D-RSL: 8.0409 g/cm^3
Result (density of the sample)
W-AIR: 020.000 g
Weight of the sample in air
W-LDQ: 017.432 g
Weight of the sample in liquid
Press ; balance will return to weighing mode. For further measurements start at
step 2.