Instruction Manual

EMB-V-BA-e-1422
21
Procedure
+ Access mode for the density determination of solids.
5. Turn on the scale with , "0.000" is displayed.
6. If the scale does not display "0.000", press
7. Access by pressing density determination mode for solids.

(example water at 19°C)
"SOLId" is briefly displayed, followed by the actual entered density of the aid
liquid. If necessary, change as described later.
+ Enter the density of the aid liquid while taking into account the current
temperature (See density table chapter 10).
8. Press and the last digit flashes.
9. Use to increase the numeric value of the flashing cipher.
Use to move the number selection to the right, the respective active
position flashes.
10. Confirm input by .
(example water at 23°C)