Manual

7 Operation Mode
7.1 Switch on/off and set zero
Operation Indication
1. Switch on balance
Press ON/OFF switch and hold briefly (at the
bottom right side of the balance)
The balance will carry out a self-test
As soon as the weight display shows
"0" in all the three display windows
your balance is ready to weigh.
2. Set on zero
The zero display and the arrow
above the „
→
0
←
“ symbol are
displayed.
7.2 Simple weighing
Operation Display
Place load onto weighing plate
Read weighing result
If weighing values are stable the
arrow will be displayed above the
- symbol.
If the goods are heavier than the weighing
range, the display will show "
QL
"
(=Overload), and a whistle is sounded.
CPB-N / CPB-DM-BA-e-1424 27