User Manual

6.4 Connecting a display unit
Attention
Put the connecting cable to the display unit in a manner that it is protected against
damage.
Description of the connection cable:
terminal Color State
EXC+ [IN+] red voltage +
SIG + [OUT+] green signal +
SIG -[OUT-] white signal -
EXC -[IN- ] black voltage -
7 Operation
Information about
Network connection (power is supplied via the connecting cable of the
display unit)
Initial Commissioning
Connection of peripheral devices
Adjustment, linearization and verification (only the complete balance is
verifiable, i.e. weighing bridge in conjunction with a suitable display unit)
and the correct operation you will in the operating instructions included in the scope
of delivery of the display unit.
So a continuous optimal performance is guaranteed:
Avoid falling load, shock loads and impacts from the side!
For weighing operation, all objects must be placed
centrically of the weighing bridge and may not hang over
the edges or the ramps.
Check adjustment at regular intervals.
9 KFP V40-IA-e-1412