User Manual

Business calls
4
INSTALLATION
- Install the Handset
Please insert the one side of the curve receiver line into the jack on
the receiver, and insert another side of the curve receiver line into
the left jack on the phone base.
- Install the Headset
Please plug the RJ9 headset into the HEADSET jack on the back of
the phone base, which is the smaller one next to the phone line jack.
- Install the Phone Base
Please plug the straight phone line into the phone line jack(TEL) on
the back of phone base, and plug another side of the straight phone
line into your wall jack.
Then the phone will work.
Please Note: This phone is powered by the phone line. It will work
after you complete the above 2 steps. No need any batteries or DC
power. It still works when power outage in your house.
Set Year/Date/ Time
Press SET button, the screen shows “SET 1 DATE” → press SET
button again, the numbers of year flash → press △/▽ button to
change the year → press SET button to confirm the year and the
OPERATION
If you need any help, please contact us at [e-mail]