Installation guide
Table Of Contents
- Introduction
- Headquarters configuration
- Selection of IP addresses for LAN
- Configuration of network interfaces of the Internet gateway
- Kerio Control installation
- Kerio Control Administration interface and product activation
- Setting connection and basic traffic rules
- DHCP Server Configuration
- DNS configuration
- Web interface and SSL-VPN certificates
- Mapping of user accounts and groups from the Active Directory
- Address Groups and Time Ranges
- Web Rules Definition
- FTP Policy Configuration
- Antivirus Scanning Configuration
- Intrusion Prevention System
- Enabling access to local services from the Internet
- Secured access of remote clients to LAN
- LAN Hosts Configuration
- Viewing statistics of Internet usage and user browsing behavior
- Configuration of the LAN in a filial office
- Interconnection of the headquarters and branch offices
- Used open source items
- Legal Notices

21
Chapter 4
Interconnection of the headquarters and branch of-
fices
This chapter provides information on interconnection of headquarters and branch office
servers by an encrypted channel (“VPN tunnel”). The following example describes only
the basic configuration of a VPN tunnel between two networks. No tips related to access
restrictions or other specific settings are included here. For example of a more complex VPN
configuration, refer to the Kerio Control — User’s Guide document.
The configuration consists of two parts: settings in the headquarters and settings of the filial.
It is supposed that both networks have been already configured as described in chapter 2 and
that connection to the Internet is available.
Information related to the example
For better reference, review the figure providing a graphical description of interconnected
networks, including their IP addresses.
Figure 4.1 Example of configuration of a network with assigned IP addresses